SHENZHEN JUTAI loop detector can not only detect vehicle, but also bike and motorcycle

-

评论

发表评论

此博客中的热门博文

Vehicle detector principle

-
图片
Vehicle detector  principle vehicle detector is the use of LC oscillator to detect whether there are metal objects at the coil to achieve the detection of the vehicle. Vehicle detector has a fixed capacitance, and then in the ground around a 3-5 m long coil, when the coil is not the vehicle when the inductance is relatively low, LC oscillation frequency is relatively high, the frequency is greater than 50Hz, when the coil has Vehicle, the inductance increased sharply, the frequency of lower-end LC oscillation, this time the frequency is less than 50Hz. Vehicle detector can be based on the frequency of LC oscillation to determine whether there is a vehicle through. In this case, Vehicle detectors are commonly used in parking lot systems. A, Vehicle detectors are used in conjunction with the barrier, and the B vehicle detector is used in conjunction with an automatic card reader. In this case, When the vehicle detector and the barrier with the use of vehicles at this time detector ...
阅读全文

Vehicle Loop Detectors, Loops, and Loop Accessories for Gate Operators & Other Equipment

-
图片
Vehicle Loop Detectors, Loops, and Loop Accessories for Gate Operators & Other Equipment Free Exit or Entrance for Automated Gates and Doors:  Loop detectors and loops may be used for a variety of applications. Vehicle loop detectors are frequently used to provide free entrance and/or free exit for traffic. Wire loop detector directly to  gate operator  or overhead door, connect to buried loop, and allow larger metal objects which drive over loop to trigger the gate or door to open, or close. Loops remain practically invisible, buried beneath gravel, asphalt, or concrete driveways. Vehicle loop detectors are a safe and reliable way of controlling an assortment of equipment. Safety Devices for Automated Gates and Doors:  Vehicle loops and loop detectors are also frequently used as safety devices. Loop detectors are wired or plugged directly to the gate operator or overhead door. Loops are buried directly under the automated gate or door. When a vehicle, or oth...
阅读全文

Vehicle Loop detector principle

-
图片
Vehicle detector  principle :vehicle detector is the use of LC oscillator to detect whether there are metal objects at the coil to achieve the detection of the vehicle. Vehicle detector has a fixed capacitance, and then in the ground around a 3-5 m long coil, when the coil is not the vehicle when the inductance is relatively low, LC oscillation frequency is relatively high, the frequency is greater than 50Hz, when the coil has Vehicle, the inductance increased sharply, the frequency of lower-end LC oscillation, this time the frequency is less than 50Hz. Vehicle detector can be based on the frequency of LC oscillation to determine whether there is a vehicle through. In this case, Vehicle detectors are commonly used in parking lot systems. A, Vehicle detectors are used in conjunction with the barrier, and the B vehicle detector is used in conjunction with an automatic card reader. In this case, When the vehicle detector and the barrier with the use of vehicles at this time detec...
阅读全文