Vehicle Loop detector principle

Vehicle detector principle
:vehicle detector is the use of LC oscillator to detect whether there are metal objects at the coil to achieve the detection of the vehicle. Vehicle detector has a fixed capacitance, and then in the ground around a 3-5 m long coil, when the coil is not the vehicle when the inductance is relatively low, LC oscillation frequency is relatively high, the frequency is greater than 50Hz, when the coil has Vehicle, the inductance increased sharply, the frequency of lower-end LC oscillation, this time the frequency is less than 50Hz. Vehicle detector can be based on the frequency of LC oscillation to determine whether there is a vehicle through.
In this case,
Vehicle detectors are commonly used in parking lot systems. A, Vehicle detectors are used in conjunction with the barrier, and the B vehicle detector is used in conjunction with an automatic card reader.
In this case,
When the vehicle detector and the barrier with the use of vehicles at this time detector can play, anti-smashed cars and cars off the role of automatic gate.
In this case,
When: Vehicle detector and automatic card reader with the use of vehicles at this time detector can play a car to take the card, but also to achieve a car can only take a role in the card.
vehicle loop detector

Contact: Una Lee
Email:una8jutai@gmail.com 
Skype:una0305
WhatsApp:+8618179436123

评论

  1. Thanks for sharing this post. Click Here to read about vehicle detection using lidar data in machine learning.

    回复删除

发表评论

此博客中的热门博文

Inductive Loop Detector works by detecting an inductance change in wire loop (coil) that is buried in road

Single Channel Vehicle Loop Detector, LD-100 (110-240VAC).LD-102( 12-24VDC) Dual Channel Vehicle Loop Detector LD-200(110-240VAC) LD-202( 12-24VDC) Single loop detector LD-150 )(110-240VAC) LD-152( 12-24VDC)

How Loop Detectors Work