Vehicle Loop Detector / Barrier Gate/ Parking Management System From Shenzhen Jutai Comm Co., Ltd
Vehicle loop detector Application:
Loop detectors are used wherever vehicles have to be detected. Like monitoring and safe guarding access ways to counting vehicles.
The output signal can be used for controlling door and gate drive mechanisms, operating barriers, controlling traffic light systems
in car parks or activating card dispensers in car parks.
The LD-100 is a single channel inductive loop detectors. The principle is based on a change in the inductance within the loop
which is caused by the metallic components of passing vehicles. The changes are picked up and evaluated by a microprocessor.
Ease of use thanks to automatic calibration when the operating voltage is applied.
Product key words
|
Loop Detectors, vehicle loop detectors, loop sensors, vehicle sensors,
car parking sensors, car park detectors
|
Application & Advantages
|
Loop detector is used in vehicle access control areas
to keep the barrier gate opening until the vehicle leaves the covering area.
|
Features
|
1) Reset Switch : The reset switch enables the detector to be manually reset
during registering and testing and it is a process of system recovery;
2) Selectable Pulse Time : This feature sets the length of time that
the pulse relay will be lasting for 1 Second or 0.5 Seconds ;
3) Pulse Relay Selection : The Pulse Relay may be configured
to activate on detection of a vehicle or when the vehicle leaves the loop;
4) Sensitivity Reinforcement : This feature sets the un-detecting level to
a maximum sensitivity to prevent failing to detect vehicles as big trucks;
5) Switch Sensibility Adjustable : 4 sensitivity setting are available
on the switches to change sensitivity ;
6) Switch Frequency Adjustable : 4 frequency settings are available
to prevent signal interference with neighboring loops ;
7) Filtering Option : This option is used to provide a delay
between detection of the vehicle and switching of the output relay .
This relay is normally used to prevent false detection
of small or fast moving objects ;
8) Permanent Presence Option : This feature ensures the detection
of the vehicle will be maintained when the vehicle stays within the loop
area
for extended periods
|
Technical data
|
1. Supply voltage: AC110V- 240V DC12-24V
2. Voltage tolerance AC: +10% / -15%
3. Voltage tolerance DC: ±15%
4. Power Consumption: 4.5VA
5. Operating temperature: -20°C to +65°C
6. Storage temperature: -40°C to +85°C
7. Frequency range: 20 kHz to 170 kHz
8. Reaction time: 10ms
9. Signal lasting time: Unlimited /
limited when loop is permanently covered 10 minutes
10. Sensitivity: Adjustable
11. Loop inductance: Total loop plus connection wiring: 50μH to 1000μH;
Ideal is 100μH to 300μH
12. Loop connection wiring: Maximum length 20 meters,
twisted at least 20 times per meter
13. Dimension: 78x40x108 mm (L x W x H)
|
The post you shared is really informative.Wohr Parking offers the ideal solution for Automatic Car Parking System in India.
回复删除car parking management system