HIGH QUALITY LOOP DETECTOR USE FOR PARKING SYSTEM

-

HIGH QUALITY loop detector use for parking system

Pulse relay, Normal open connection
Pulse relaly, Common connection
Existence relay, Normal open connection
Existence relay, Common connection
Loop
Power ground wire(110-220VAC)
Existence relay, Normal close connection
Pulse relay, Normal close connection
Power requirements: 12-24VDC /110-240VAC
Frequency Tuning: Fully automatic
Iuductance Value: 20-2000uH
Sensitivity: Eight grade
Working Frequency: 2 switches Alternative, Frequency depends mainly on coil geometry, The frequency: 20-200kHz
Automatic Sensitivity upgrade: Switches alternative
Pulse relay working mode: Leave pulse/Enter pulse
Response time: 200ms
Drift Compensation Rate: Timely compensation
Working Temperature: -45C~+70C
Double Channels
Channel 1Loop
Channel 2 Loop
Channel 2 Relay, normal open connections
Channel 2 Relay, common connections
Power ground wire(110-240VAC)
Channel 1 Relay, normal open connections
Channel 1 Relay, common connections
Power requirements: 110-240VAC/12-24VDC
Frequency Tuning: Fully automatic
Iuductance Value: 20-2000uH
Sensitivity: Panels on the Grade 4 scale
Working Frequency: 2 switches Alternative, Frequency depends mainly on coil geometry, The frequency: 20-200kHz
Automatic Sensitivity upgrade: Switches alternative
Pulse relay working mode: Leave pulse/Enter pulse
Response time: 200ms
Drift Compensation Rate: Timely compensation
Working Temperature: -45C–70C
Warranty time: 2 year for digital parts.



评论

发表评论

此博客中的热门博文

Vehicle Loop Detectors, Loops, and Loop Accessories for Gate Operators & Other Equipment

-
图片
Vehicle Loop Detectors, Loops, and Loop Accessories for Gate Operators & Other Equipment Free Exit or Entrance for Automated Gates and Doors:  Loop detectors and loops may be used for a variety of applications. Vehicle loop detectors are frequently used to provide free entrance and/or free exit for traffic. Wire loop detector directly to  gate operator  or overhead door, connect to buried loop, and allow larger metal objects which drive over loop to trigger the gate or door to open, or close. Loops remain practically invisible, buried beneath gravel, asphalt, or concrete driveways. Vehicle loop detectors are a safe and reliable way of controlling an assortment of equipment. Safety Devices for Automated Gates and Doors:  Vehicle loops and loop detectors are also frequently used as safety devices. Loop detectors are wired or plugged directly to the gate operator or overhead door. Loops are buried directly under the automated gate or door. When a vehicle, or oth...
阅读全文

What is a LOOP? Loop Installation?

-
图片
What is a LOOP? A loop sensor is a detector that senses a change in inductance caused by the passage of a vehicle near the sensor. It is used to manage traffic flow. Vehicles passing over or stopped within the detection area of an inductive-loop detector decrease the inductance of the loop. The electronics unit senses this event as a decrease in frequency and sends a pulse to the controller signifying the passage or presence of a vehicle. Loop Installation? Traffic Counting Loops are installed in the surface asphalt of secondary roads, highways, freeways & freeway ramps. The number of loops per location varies from 1 (on a single lane ramp) up to 8, 10 or more on a multi-lane freeway. The dimensions of a loop are dependant on the exact requirements from Ministry of Transportation, Ontario, Region or Municipality requesting the work. In order to install the loops Highway Technology requests permission to close the lane or lanes in which the work is to t...
阅读全文

Inductive Loop Detector works by detecting an inductance change in wire loop (coil) that is buried in road

-
图片
 Inductive Loop Detector works by detecting an inductance change in wire loop (coil) that is buried in road. It does that by measuring the frequency of the internal oscillator which powers the mentioned coil. When a metallic object moves over the coil it changes its inductance and that in turn changes the oscillator frequency which is measured by the microcontroller. It is used for vehicle access control at door and barrier controls, for monitoring the occupancy and for vehicle counting in parking garages, for traffic light installations and traffic...
阅读全文