Reading 90-130cm RFID long range reader with RS232/Wiegand26 / Wiegand34

-
Reading 90-130cm RFID long range reader with RS232/Wiegand26 / Wiegand34 
(1)Introduction:

GP99 is an extended range 125kHz RFID Long Range proximity reader featuring compact dimension.It can read range from 90cm to 130 cm depends on the interference on site. GP99 can effectively penetrate solar film and allows MC-5 proximity card to be read from inside the car without winding down windows. The unit will run an excellent power supply and marking it particularly suited to access control,car parking and through-well reading applications.

Ideal solution for car parking access control; residential and commercial building – no more hand getting wet during rainy day and less car robbery risk at entrance.
(2)Features:
Ø   Can penetrate solar film (V-Kool40).
Ø  Auto tuning function to compensate presence of metal and interference.
Ø  Extended reading range from 90 cm to 130 cm.
Ø  Bright LED indicators, tuning LED bar.
Ø  Firmware up gradable in the field..
Ø  IP-54 waterproof housing design.
Ø  High-quality power supply with noise filter included.
Ø  Loop Inductive function optional.
Ø  Anti-rereading function included.

125k long range proximity reader
(3)Application examples:
Ø  Access Control.
Ø  Car Parking Systems.
Ø  Through -wall Reading Application.
Ø  Personal indentification.
Ø  Any Long Range Reading Application.
Ø  Hand Free Applications.

(4)GP99 Advantages
Ø  Anti-Rereading function,
Ø  Anti-Interference,
Ø  Signal LED indicators,
Ø  Loop Inductive function (Selectable),
Ø  IP54 Water-proof level,
Ø  Long Service Life.
*when the card within in the inductive range and card ID be read by one reader, the other reader will not read this card again. This function is main be used  for solve the interference problems behind the other reader.
*Under the same environment, GP99 anti-interference ability is strong, very afflictive external conditions.
*Our reader with the IP54 water-proof level, and it can work perfectly in the rainy days, no need the additional accessories, and it can save your cost ,and customers pay less money but can got very good experience.
*Our reader has integrate the loop inductive function, it can work with our vehicle loop detector. For some special application, you can connect to the loop detector and when the vehicle on loops, the card can start to work with the reader, which can make the whole system with high reliable and stable.
(5) Package list
1 pcs GP99 reader
1 pcs power supply
2 pcs EM card
gP99 READER PACKAGE

评论

发表评论

此博客中的热门博文

Vehicle Loop Detectors, Loops, and Loop Accessories for Gate Operators & Other Equipment

-
图片
Vehicle Loop Detectors, Loops, and Loop Accessories for Gate Operators & Other Equipment Free Exit or Entrance for Automated Gates and Doors:  Loop detectors and loops may be used for a variety of applications. Vehicle loop detectors are frequently used to provide free entrance and/or free exit for traffic. Wire loop detector directly to  gate operator  or overhead door, connect to buried loop, and allow larger metal objects which drive over loop to trigger the gate or door to open, or close. Loops remain practically invisible, buried beneath gravel, asphalt, or concrete driveways. Vehicle loop detectors are a safe and reliable way of controlling an assortment of equipment. Safety Devices for Automated Gates and Doors:  Vehicle loops and loop detectors are also frequently used as safety devices. Loop detectors are wired or plugged directly to the gate operator or overhead door. Loops are buried directly under the automated gate or door. When a vehicle, or oth...
阅读全文

What is a LOOP? Loop Installation?

-
图片
What is a LOOP? A loop sensor is a detector that senses a change in inductance caused by the passage of a vehicle near the sensor. It is used to manage traffic flow. Vehicles passing over or stopped within the detection area of an inductive-loop detector decrease the inductance of the loop. The electronics unit senses this event as a decrease in frequency and sends a pulse to the controller signifying the passage or presence of a vehicle. Loop Installation? Traffic Counting Loops are installed in the surface asphalt of secondary roads, highways, freeways & freeway ramps. The number of loops per location varies from 1 (on a single lane ramp) up to 8, 10 or more on a multi-lane freeway. The dimensions of a loop are dependant on the exact requirements from Ministry of Transportation, Ontario, Region or Municipality requesting the work. In order to install the loops Highway Technology requests permission to close the lane or lanes in which the work is to t...
阅读全文

Inductive Loop Detector works by detecting an inductance change in wire loop (coil) that is buried in road

-
图片
 Inductive Loop Detector works by detecting an inductance change in wire loop (coil) that is buried in road. It does that by measuring the frequency of the internal oscillator which powers the mentioned coil. When a metallic object moves over the coil it changes its inductance and that in turn changes the oscillator frequency which is measured by the microcontroller. It is used for vehicle access control at door and barrier controls, for monitoring the occupancy and for vehicle counting in parking garages, for traffic light installations and traffic...
阅读全文