Safety Beam Automatic photocell sensors 2 beam 12 / 24V Infrared Sensors for gate opener

Safety Beam Automatic photocell sensors 2 beam 12 / 24V Infrared Sensors for gate opener

1. Photocell Sensor



Technical Parameter

12/24(VAC/VDC)

Max.Range up

20Meters(indoor or outdoor)

working temperature

-10-+60

Max.TX working current

25mA

Max.RX working current

35mA

Max relay contact

500mA

IP Rate

IP55

Infrared Sensor Quotation

QTY (pair)

1-99

100-299

300-499

500-999

>1000

EXW Rirce (USD)

15

12

10

9

8


2.Function of photocell sensors

1)Adopt microprocessor control(CPU), real digital circuit.
2)Professional waterproof design with the rubber seal around
3)1years warranty
4)Single beam sensor/single beam detector is used for automatic slide door, coil door , garage door windows etc.
5)Even installed at low height(20-40cm from the floor), the detecting distance can also be guaranteed(5-15meters).
6).The beam produced by ZOOM provides a self-detecting function for the sliding doors. Once the self-detecting beam is interrupted, the door will stop closing and reverse rapidly to the utmost width. The door will open until the detecting beam is resumed. When the door completely closes, the detecting beam becomes invalid.


3.Shipping of photocell sensors
  •  FedEx/DHL/UPS/TNT for samples, Door-to-Door;
  • By Air or by Sea for batch goods, for FCL; Airport/ Port receiving;
  • Customers specifying freight forwarders or negotiable shipping methods!
  • Delivery Time: 2-7 days for samples; 5-25 days for batch goods.
Safety Beam Automatic photocell sensors

评论

此博客中的热门博文

Vehicle Loop Detectors, Loops, and Loop Accessories for Gate Operators & Other Equipment

What is a LOOP? Loop Installation?

Inductive Loop Detector works by detecting an inductance change in wire loop (coil) that is buried in road