Advangate For IR-20M Photoelectric Beam Sensor To Garage Gate And Sliding Gate Access

-
Advangate For IR-20M Photoelectric Beam Sensor To Garage Gate And Sliding Gate Access System 

Name:IR-20M Photoelectric Beam Sensor To Garage Gate And Sliding Gate Access System Application
Power Supply:12/24VAC/DC
Detecting Distance:with 20m stable detection distance
Max.Range Up:20Meters(Indoor or Outdoor)
Operate Temperature:-10degree-60 degree
Max.TX working Current:25mA
Max.RX working Current:35mA
Max.Relay Contract:Max 500mA e 48Vac/dc
IP rate:IP65
Cover Material:Anti-UV Material
Can working at outside directly;
Face to sunlight,distance not reduce
Waterproof:Water Proof and can working at outside directly 
OEM/ODM:OEM and ODM service offered
Warranty Life:24 years warranty life
Net Weight:160g

 IR-20M Photoelectric Beam Sensor To Garage Gate And Sliding Gate Access System Application:
  • ​​​​​Garage Gate Access Control System;
  • Barrier Gate Access Control System
  • Automatic Gate Control System;
  • Door Access Control System;
  • Rolling Shutter Gate system;
  • Home Safe Protection System
  • Smart Home Alarm system
  • Wireless Alarm System

 IR-20M Photoelectric Beam Sensor To Garage Gate And Sliding Gate Access System  Precautions：
  • Avoid facing strong sunlight, car headlights, etc when intall the IR-20D Photoelectric Beam Sensor
  • Avoid reflections from the transmitter of photoelectric Beam Sensor  or receiver of photoelectric Beam Sensor;
  •  Do not install the photoelectric Beam Sensor on an unstable surface.
  • Consider the seasonal changes, do not install in places where the beam may be blocked by leaves or plants.
  • Do not install the photoelectric beam snesor in places that may be bombarded by dirty water or directly splashed by the waves

beam photocell sensor

infrared beam sensor
Infrared photocell sensor

infrared photocell sensor
#photocellsensorwikipedia  #throughbeamsensorapplication  #howphotoelectricsensorworks  #photoelectricsensorcost  
 #electronicphotocellsensor #photoelectricreceiver #photobeamsensor #cheapphotoelectricsensor #infraredsensorspecification #photoelectricdevices #internalphotocellswitch  
#replacementphotocellsensor #dcphotocellsensor #gatebeamdetectors #infraredlightbeamsensors #slidinggatesensor #photovoltaicsensor #photoelectricbeam #whatisaphotocell #photoelectricsensorcircuit #infrareddistancesensor #infraredgate #eyesensor #photocellsensorprice #reflectivephotoelectricsensor #safetyphotocell #photocellcircuit #lightbarriersensor 

评论

发表评论

此博客中的热门博文

Vehicle Loop Detectors, Loops, and Loop Accessories for Gate Operators & Other Equipment

-
图片
Vehicle Loop Detectors, Loops, and Loop Accessories for Gate Operators & Other Equipment Free Exit or Entrance for Automated Gates and Doors:  Loop detectors and loops may be used for a variety of applications. Vehicle loop detectors are frequently used to provide free entrance and/or free exit for traffic. Wire loop detector directly to  gate operator  or overhead door, connect to buried loop, and allow larger metal objects which drive over loop to trigger the gate or door to open, or close. Loops remain practically invisible, buried beneath gravel, asphalt, or concrete driveways. Vehicle loop detectors are a safe and reliable way of controlling an assortment of equipment. Safety Devices for Automated Gates and Doors:  Vehicle loops and loop detectors are also frequently used as safety devices. Loop detectors are wired or plugged directly to the gate operator or overhead door. Loops are buried directly under the automated gate or door. When a vehicle, or oth...
阅读全文

What is a LOOP? Loop Installation?

-
图片
What is a LOOP? A loop sensor is a detector that senses a change in inductance caused by the passage of a vehicle near the sensor. It is used to manage traffic flow. Vehicles passing over or stopped within the detection area of an inductive-loop detector decrease the inductance of the loop. The electronics unit senses this event as a decrease in frequency and sends a pulse to the controller signifying the passage or presence of a vehicle. Loop Installation? Traffic Counting Loops are installed in the surface asphalt of secondary roads, highways, freeways & freeway ramps. The number of loops per location varies from 1 (on a single lane ramp) up to 8, 10 or more on a multi-lane freeway. The dimensions of a loop are dependant on the exact requirements from Ministry of Transportation, Ontario, Region or Municipality requesting the work. In order to install the loops Highway Technology requests permission to close the lane or lanes in which the work is to t...
阅读全文

vehicle loop detector / loop sensor/ traffic loop detector/ boom barrier/ single loop detector manufacture

-
图片
vehicle loop detector / loop sensor/ traffic loop detector/ boom barrier/ single loop detector manufacture This is Una Lee from Shenzhen JUTAI Comm Co., Ltd. We are loop detector manufacture. we know that you are need loop detector in your market. Do you know why choose Jutai loop detector?   1.The inductive range is from 20uh-2000uf, nearly all types of different vehicle can be detector (bike, motorcycle, bus, car,truck,tailer,ect) 2.JUTAI Loop Detector is designed to accommodate numerous applications, can be adjusted intelligently to any environments and virtually eli minating false detection. 3.On the front panel, the four selectable loop frequencies (20~80KHz) can completely eliminate any crosstalk. If intermittence happen or failed loops get self restored, the detector will resume to normal operation without manually reset the detector. 4.Two separate output relays:   Output A is presence output. Can be extended for 0, 2, 5, 8, 10, 15...
阅读全文