How Barrier Gate Working With Jutai Products?

Barrier Gate Working With Jutai Products

Gate barriers are typically found at level crossings, parking facilities, checkpoints and entrances to restricted areas. They are also the usual method for controlling passage through toll booths, and can also be found on some freeway. entrance ramps which are automatically controlled to drop to restrict traffic in the event of accident cleanup or road closures without the need to dispatch road workers or law enforcement to use a vehicle to block the way. Some barrier gates are automatic and powered, others are manually operated. In some places, boom gates are installed across suburban streets as a traffic calming measure, preventing through traffic, while allowing to take advantage of the shorter and more direct route authorized vehicles such as emergency services and buses.
Barrier gate project
barrier gate installed in Taiwan


Automatic boom barrier gate can be operated through Jutai Products

1. Loop Detector
2. RFID tags / RFID reader / Proximity reader / UHF long range reader
3. Push button
4. Parking management system
5. Remote control

How is barrier gates working with JUTAI loop Detector

When you approach car park boom gate, you may notice a rectangular where the road surface has been cut with a saw and then re-sealed. This is the sensor loop. The loop consists of several turns or wire buried in the roadway and connected to an electronic circuit which can detect a car passing over it. Normally the loop is about 2m x 0.8-1m in size. sensor loop type can detect a different type of car such as Bicycles, cars, forklifts, trucks or truck/trailer combinations with drawbars are detected with precision.  When a loop detector detects a car on the loop. the give a reply to a barrier gate controller No / NC port. Barrier gates will automatically open or close.
barrier gate working with loop detector

How is barrier gates working with RFID tags / RFID reader

All the resident vehicles have to first register with the management committee and gate an RFID tag placed on their vehicle. An RFID reader tag is installed on the boom barrier, which is placed at the entrance of the community. When a car is about to enter the community, the RFID tag on the vehicle is read by the reader tag on the boom barrier and the barrier gate opens, letting the vehicle in, In case of a vehicle that is not registered with the community, the barrier gate will not open.
Barrier gate working with rfid reader
barrier gate with  active long range reader

How is barrier gates working with the parking management system?

The parking management system is found at department, parking facilities, checkpoints, and entrances to restricted areas. When a car is about to enter the community. the driver gets a ticket or IC card one the parking entrance terminal and the barrier gates open, letting the vehicle in. When the driver finished payment then returns back a ticket or IC card one the parking exit terminal and barrier gates open, letting the vehicle out.
barrier gate parking management system

How is barrier gates working with push button and remote control?

Push button and remote control are manual open or close barrier gate. When a car wants to pass the barrier gate, the manager will use the remote control or push button to open or close barrier gates.
barrier gate working with push button
Our company supplier different barrier gate solutions for barrier gate clients. One-stop service.
More information contact:
Una Lee
WhatsApp:+8618179436123
Skype:una0305
Wechat:litian4214
Email:una8jutai@gmail.com
Website:https://www.jutaigateaccess.com/

评论

此博客中的热门博文

Inductive Loop Detector works by detecting an inductance change in wire loop (coil) that is buried in road

Single Channel Vehicle Loop Detector, LD-100 (110-240VAC).LD-102( 12-24VDC) Dual Channel Vehicle Loop Detector LD-200(110-240VAC) LD-202( 12-24VDC) Single loop detector LD-150 )(110-240VAC) LD-152( 12-24VDC)

How Loop Detectors Work